Home Page | About Us | Products & Services | Test Facilities | Contact Us | Feedback

   

Products and services
Catalogue

INSTA CHLOR

CHLORINATION WITHOUT CHLORINE GAS, SODIUM HYPO OR BLEACHING POWDER

Instant On-Line Chlorinator

As per ‘WHO’ (World HeaLTH oRGANIZATION) guidelines for drinking water quality, “Terminal Disinfection of piped drinking water is of paramount importance and is almost universal.”

‘Chlorine & Hypochlorite are the most often used.’

 

Effective and accurate chlorination in drinking water systems was always a difficult task resulting either in under or excess chlorination.  Dependence on supply of chlorine gas or Sodium Hypo Chlorite for small drinking water treatment requirements and problems associated with operation and maintenance of System was always creating a great hardship.

 

PRODUCTS FOR SOLVING PROBLEM

PRIMETECH, a pioneer in Electrochlorination Chlorination field determined to develop ‘products for solving problems’ has successfully developed a revolutionary “INSTA-CHLOR’ on line Chlorine generating and disinfecting system, specifically to solve the problems in small drinking water system.

 

Like any other ’Chlorination System’ INSTA CHLOR does not need any consumable such as Chlorine Gas or Sodium Hypochlorite or Bleaching Powder or any other disinfectant.

 

It utilizes effectively the Sodium and Chloride ions normally present in potable water to produce “Sodium Hypochlorite” on-line while water being pumped.  This instant on-line generation of chlorine is possible by the Innovative state of the art,  ‘Low conductivity Electrolysis (LCE) process’.  Thus making ‘Chlorination’ a pleasant experience without any difficulty.

SALIENT FEATURES

  • Disinfects water without external addition of any disinfectant.

  • Disinfection by the Innovative-State of the Art, Low conductivity electrolysis process.

  • Disinfects water using ‘Sodium and Chloride’ ions present in water forming ‘Sodium Hypochlorite’ on line.

  • On-line device does not need any attention for operation.

  • Easy to control and set the required level of Chlorine between 0.1 to 1PPM.

  • Very low capital cost when compared to UV or ozone systems for the given water volume.

  • Superior to other disinfection technologies, since Chlorine has the residual property to ascertain instantly bacteriological quality of treated water.

  • Optionally the system can be automated easily with the help of Chlorine residual analyzer to continuously monitor and control the level of Chlorination.

  • User friendly maintenance procedure.

  • Assured backup service through dedicated service crew.

INSTA CHLOR MODEL SELECTION
A. Chlorine dosage 1 ppm, B. Chlorine  dosage  2 ppm
Chloride level in water – 50 ppm

MODEL

CHLORINE DOSAGE

WATER QUANTITY

TREATED LPH

PIPE LINE SIZE

CONNECTED LOAD

IC - 2006

A

500

15NB

0.1 kw

B

0.2 kw

IC - 2015

A

1,000

15NB

0.2 kw

B

0.4 kw

IC - 2020

A

2,000

20NB

0.4 kw

B

0.7 kw

IC – 2025

A

3,500

25NB

0.6 kw

B

1.2 kw

IC – 2040

A

9,000

40NB

1.4 kw

B

2.75 kw

IC – 2050

A

14,000

50NB

2.2 kw

B

4.3 kw

For higher flow or for higher chlorine ppm requirement – custom built systems can be offered.

For water having  “NaCl” level less than 50 ppm, salt solution injecting device is to be fitted as an extra item.

Due to continuous developments design and contents of this phamphlet are subject to change without notice.

Designed By eMuthuMadhavan